The UK Atomic Energy Authority (UKAEA) and The Henry Royce Institute for advanced materials have today published a roadmap for developing materials for fusion energy.
The roadmap, developed with the input of over a hundred materials experts from the UK research community and industry, highlights five major areas of work required to enable the materials for future fusion power plants.
Fusion – the same principle by which the sun creates heat and light – has the potential to be an abundant, low-carbon and safe part of the world’s future sustainable energy supply. Recent advances in the technology mean that prototype fusion power stations are now being designed, with the UK’s STEP plant due to go online in the early 2040s.
The leading contender for fusion power plants is the ‘tokamak’ – a ring-shaped machine in which fuel is confined with powerful magnets and heated until particles fuse together. The fusion process produces high-energy neutrons that can be turned into electricity, but which could also significantly damage and irradiate materials within the device.
Identifying, developing and qualifying the right materials is key to delivering commercial fusion for two reasons. First, plant efficiencies, safety and availability often hinge on the quality of the component materials. Second, a sustainable fuel cycle requires highly productive fuel breeding materials. Both plant components and fuel breeder materials will need to withstand a highly challenging combination of neutron bombardment and thermal, magnetic, electric and mechanical loads in a tokamak power plant.
The five priority areas identified by the UK Fusion Materials Roadmap are:
- Novel materials to minimise the amount of activation in the structure of the fusion power plant;
- Compounds that can be used within the power plant to optimise breeding of tritium fuel to sustain the fusion process;
- Magnets and insulators that are resistant to irradiation from fusion reactions – especially under cryogenic conditions;
- Structural materials able to retain their strength under neutron bombardment at high operating temperatures (over 550 degrees C);
- Engineering assurance for fusion materials – providing irradiated sample data and modelled predictions such that plant designers, operators and regulators have confidence that materials are suitable for use in future commercial power stations.
For more information, visit the GOV.uk website.